SGS tested folding up nylon bathroom grab bar

Material: anti-bacterial nylon with flange fittings and base

Size: 600*750mm

Color: white, yellow or customized

Technology: moulding injection

Weight capacity: 180kgs tested by SGS

Application: bathroom facility for disabled or elderly, pregnant people

E-mail Contact Us

Product Description

This grab bars are available in many different models, lengths, materials and colors. They provide secure and reliable support in many critical areas and are great solutions for prevention of accidents in all indoor spaces. A grab bar is a very convenient form of support that can easily be installed in any location and exactly where it is needed; in the bathroom or shower, next to the washbasin or by the toilet, but also in the kitchen, hallway or bedroom. In all locations, the grab bar can be installed in the optimal position for the user; horizontal, vertical or diagonal, to provide a safe and comfortable grip and maximum support.

Toilet Grab Bar:

1. wall mounted.

5. 5mm nylon surface

6. 1.0mm stainless steel inner tube

7. 35mm diameter

Nylon Tube Surface:
1. easy to clean
2. warm and comfortable grip
3. salient points for easy grip.
4. antibacterial
5.600mm length standard, can be cut to certain length.

ZS products is high quality made from raw particles, processing without any irritating smell, material toughness wall, super wear-resistant, add antibacterial molecules, through the national building materials testing report.

Installation:

1.Vertical grab bars may help with balance while standing.

2.Horizontal grab bars provide assistance when sitting or rising, or to grab onto in case of a slip or fall.

3.Some grab bars can be installed at an angle, depending on the needs of the user and the

positioning. Grab bars installed horizontally offer up the greatest safety and care should be taken

when installing them on the angle as this contrary to the ADA Guidelines. Often this angled installation is easier for people pulling themselves up from a seated position.

Please use normal bit - bit specification no. 8 for cement wall.Please use triangle drill or glass drill (hydraulic drill) for drilling ceramic tile walls. Change back to ordinary drill bit after drilling ceramic tile. Drill bit specification (no. 8) continues drilling.